Along-Track Moving Target Indication and Imaging in FMCW SAR

Signal Model of Moving Targets in FMCW SAR

The geometry of a moving target in FMCW SAR is the same as that in a pulse SAR system, as shown in Figs. 2.2 and 2.3. To briefly compare the additional phase error of FMCW SAR, the accelerations are neglected, and the instantaneous slant range of a moving target in FMCW SAR can be expressed as

Perform Taylor expansion of Eq. 5.4.1, it can be approximated as

where RA = J(R0Vrta)2 + (Va — Vy)2t^. Compare Eq. 5.4.2 with Eq. 2.3.4, two additional phase terms exists in Eq. 5.4.2. Substitute Eq. 5.4.2 into Eq. 5.2.7 and perform RVP correction, it yields

The fifth term in Eq. 5.4.3 is the range location shift induced by cross-track velocity. A moving target is dis-located in the range direction in a stationary FMCW SAR image. The sixth term in Eq. 5.4.3 is the FMCW system. The seventh term in Eq. 5.4.3 is also a range walk, which is induced by the cross-track velocity.

Many researchers have developed algorithms to indicate and focus moving targets in FMCW SAR by using the GMTI and GMTIm algorithms and correct the additional phase errors [18, 19]. However, we discovered that the moving targets can be indicated from the additional phase errors, and the motion parameters can be extracted from them.

< Prev   CONTENTS   Source   Next >