Table of Contents:

ACKNOWLEDGMENTS

I am grateful to H.L.M. Lelieveld, formerly Unilever R&D, The Netherlands, for commenting on the manuscript. Furthermore, I thank all the companies that have supplied photographic material of their products, as well as several food manufacturers who delivered photos either directly or indirectly: Kraft Heinz Company, General Mills, Inc., Kellogg Company, MOM Brands, McCain Foods Limited, Ocean Spray Cranberries, Inc., PepsiCo Quaker Oats Company, Nestle, Unilever, Mondelez International, Inc.

REFERENCES

ASME BPE committee, 2014. Bioprocessing Equipment, ASME BPE-2014. American Society of Mechanical Engineers (ASME), New York, 324 p.

Baking Industry Sanitation Standards Committee (BISSC) of the American Society of Baking, 2003. American National Standard for Baking Equipment — Sanitation Standard, ANSI/ BISSC/Z50.2-2003, Chicago, 35 p.

Bylund, G., 2015. Building-blocks of dairy processing, Ch. 6, section 6.8 — Piping, valves and fittings, Ch. 21. In: Teknotext, A.B. (Ed.), Dairy processing handbook. Tetra Pak Processing Systems A/B, Lund, Sweden.

Campden Food & Chorleywood Research Association (CFCRA), 1997. Hygienic Design of Liquid Handling Equipment for the Food Industry. In: Timperley, A.W. (Ed.), Technical Manual № 17, pp. 1—204.

Cocker, R., 2004. Hygienic design and assessment of food processing valves. New Food 7 (1), 8—15.

Cole-Parmer, 2009. The Sanitary Instrumentation Primer: keeping your process application contamination-free, Illinois, 12 p.

FDA, 2009. Grade “A” Pasteurized Milk Ordinance, Silver Spring, Maryland, 382 p.

Haga, R., Murakami, S., Ostrove, S., Weiss, S., 1997. Cleaning mechanism study for biopharmaceutical plant design. Pharm. Eng. 17 (5), 8—21.

Hauser, G., Curiel, G.J., Bellin, H.-W., Cnossen, H.J., Hofmann, J., Kastelein, J., et al., 2004a. Hygienic Equipment Design Criteria, EHEDG Guideline №8, second ed. EHEDG working group Design Principles, EHEDG, Frankfurt, Germany, pp. 1—16.

Hauser, G., Curiel, G.J., Bellin, H.-W., Cnossen, H.J., Hofmann, J., Kastelein, J., et al., 2004b. Hygienic Design of Open Equipment for Processing ofFood, EHEDG Guideline № 13, 2nd ed. EHEDG working group Design Principles, EHEDG, Frankfurt, Germany, pp. 1 —24.

Hauser, G., Curiel, G.J., Bellin, H.-W., Cnossen, H.J., Hofmann, J., Kastelein, J., et al., 2007. Hygienic Design of Closed Equipment for Processing of Food, EHEDG Guideline №10, 2nd ed. EHEDG working group Design Principles, EHEDG, Frankfurt, Germany, pp. 1—22. Hauser, G., Eastwood, C.A., Woodall, D.L., Timperley, D.A., Curiel, G.J., Peschel, P., 1993. Welding stainless steel to meet hygienic requirements, EHEDG Guideline № 9, first ed. EHEDG working group ‘Design Principles’, EHEDG, Frankfurt, Germany, pp. 1—21.

Hohler, A., Schumacher, B., Schrodt, T., Buhler, H., Nalbach, U., Gasparetti, M., et al., 2007. Hygienic Design and Application of Sensors. EHEDG Guideline № 37. EHEDG working group “sensors”, EHEDG, Frankfurt, Germany, pp. 1—35.

Holah, J., 2000. Food processing equipment design and cleanability. In: Gormley, R. (Ed.), Flair-Flow Technical Manual 377A/00. National Food Centre, Dublin, 39 p.

Jensen, B.B.B., Nielsen, J.B., Falster-Hansen, H., Lindholm, K.-A., 2011. Tank cleaning technology: innovative application to improve cleaning-in-place. EHEDG Yearbook 2011/2012. EHEDG, Frankfurt, Germany, pp. 26—30.

Kopitzke, T., Barnickel, M., Gasparetti, M., Merhof, P., Wahlers, J., 2006. Hygienic Welding of Stainless Steel Tubing in the Food Processing Industry, EHEDG Guideline № 35, first ed. EHEDG working group ‘Welding’, EHEDG, Frankfurt, Germany, pp. 1—29.

Ladenburger, D., 2015. The hygienic advantages of the P3-diaphragm in aseptic processing. EHEDG Yearbook 2015/2016, pp. 108—113.

Lelieveld, H.L.M., Mostert, M.A., Curiel, G.J., 2003. Hygienic Equipment Design. In: Lelieveld, H. L.M., Mostert, M.A., Holah, J., White, B. (Eds.), Hygiene in Food Processing, 1st ed. Woodhead Publishing, Cambridge, United Kingdom, pp. 122—166. Book №88 (Chapter 8).

Moerman, F., 2013a. Vacuum pressure measurement (parti): direct vacuum pressure gauges. Maint. Mag. 21 (114), 28-31.

Moerman, F., 2013b. Vacuum pressure measurement (part 3): vacuum gauges suitable for the food and pharmaceutical industry. Maint. Mag. 22, 61-64.

Moerman, F., Fikiin, K., 2016. Hygienic design of Air Blast Freezers. In: Lelieveld, H.L.M., Holah, J., Gabric, D. (Eds.), Handbook of Hygiene Control in the food industry, second ed. Elsevier, Cambridge, United Kingdom, pp. 271-316. (Chapter 22).

Moerman, F., Kastelein, J., 2014. Hygiene design and maintenance of equipment. In: Motarjemi, Y., Lelieveld, H.L.M. (Eds.), Food Safety Management: A Practical Guide for the Industry. Academic Press, San Diego, pp. 673-739. (Chapter 26).

Moerman, F., Partington, E., 2014. Materials of construction for food processing equipment and services: requirements, strengths and weaknesses. J. Hyg. Eng. Design 6, 1-37.

Moerman, F., Wouters, P., 2015. Hygiene concepts in food factory design. In: Leadley, C., Sykes, R. (Eds.), Innovation and future trends in food manufacturing and supply chain technologies, 1st ed. Woodhead Publishing, Cambridge, United Kingdom, pp. 81-133. (Chapter 4) N 0 293.

Moerman, F., Rizoulieres, Ph, Majoor, F.A., 2014. Cleaning-in-place. In: Lelieveld, H.L.M., Holah, J., Napper, D. (Eds.), Hygiene in Food Processing: principles and practice, 2nd ed. Woodhead Publishing, Cambridge, United Kingdom, pp. 303-383. N0 258. (Chapter 10). Schonrock, F.T., 2005. Improving the hygienic design of valves. In: Lelieveld, H.L.M., Mostert, M.A., Holah, J. (Eds.), Handbook of Hygiene Control in the Food Industry, 1st ed. Woodhead Publishing, Cambridge, United Kingdom, pp. 263-272. BookN0 116. (Chapter 16). Wiedenmann, W., 2013. Damage scenarios for valves: identifying the potential for optimisation. EHEDG Yearbook 2013/2014, European Hygienic Engineering & Design Group, Frankfurt, Germany, pp. 87-91.

 
Source
< Prev   CONTENTS   Source   Next >