Menu
Home
Log in / Register
 
Home arrow Engineering arrow Materials Processing Fundamentals 2017
Source

Conclusions

The geometry of the reactor and electrochemical kinetics are mainly influenced by the hydrodynamic properties of the reactor filter-press and the concentration of the electro silver recovered. The variation in the distribution of the potential in the electrolyte for each current value is 1-2% maximum. Therefore, it can be inferred that the geometry of the reactor contributed with an increase of 4% in of Ag concentration electro-recovered in the RST reactor with respect to the RSM.

Acknowledgements The authors externalize their gratitude to PRODEP, the Universidad Tecnologica de Tulancingo and the Universidad Autonoma del Estado de Hidalgo for the support granted for the development of this research.

References

  • 1. E. P. Rivero, F. F. Rivera, M. R. Cruz-Diaz, E. Mayen, I. Gonzalez, “Numerical simulation of mass transport in a filter press type electrochemical reactor FM01-LC: Comparison of predicted and experimental mass transfer coefficient,” Chemical Engineering Research and Design, 90 (2012)., 1969-1978.
  • 2. I. Perissi, C. Borri, S. Caporali, A. Lavacchi, Excerpt the Proceedings of the COMSOL Conference, Milan, Italia, (2009).
  • 3. L. Yu-Ming, L. Shuo-Jem, L. Chi-Yuan, C. Dar-Yuan, “The multiphysics analysis of the metallic bipolar plate by the electrochemical micro-machining fabrication process,” Journal of Power Sources, 193 (2009), 227-232.
  • 4. E. P. Rivero, M. R. Cruz-Diaz, F. J. Almazan-Ruiz, I. Gonzalez, “Modeling the effect of non-ideal flow pattern on tertiary current distribution in a filter-press-type electrochemical reactor for copper recovery,” Chemical Engineering Research and Design, 100 (2015), 422433.
  • 5. K. C. Pillai, S. J. Chung, I. S. Moon, “Studies on electrochemical recovery of silver from simulated waste water from Ag(II)/Ag(I) based mediated electrochemical oxidation process,” Chemosphore, 73 (2008), 1505-1511.
  • 6. U. M. Lopez-Garcia, P. E. Hidalgo, J. C. Olvera, F. Castaneda, H. Ruiz, G. Orozco, “The hydrodynamic behavior of a parallel-plate electrochemical reactor,” Fuel, 110 (2013), 162170.
  • 7. P. A. Ramirez Ortega, V. E. Reyes Cruz, M. A. Veloz Rodriguez, “Recuperacion de plata de desechos radiologicos en un reactor electroquimico tipo prensa sobre un electrodo de acero inoxidable A304 variando la velocidad de flujo” (Memorias en Extenso del XXIV Congreso de la Sociedad Mexicana de Electroquimica, Puerto Vallarta, Mexico, 2008).
  • 8. V. Reyes-Cruz, I. Gonzalez, M. T. Oropeza, “Electro-recovery of gold and silver from a cyanide leaching solution using a three-dimensional reactor,” Electrochemica Acta, 49 (2004), 4417-4423.
  • 9. A. Frias-Ferrer, I. Tudela, O. Louisnard, V. Saez, M. Deseada Esclapez, M. I. Diez-Garcia, P. Bonete, J. Gonzalez-Garcia, “Optimized design of an electrochemical filter-press reactor using CFD methods,” Chemical Engineering Journal, 169 (2011), 270-281.
  • 10. John Newman and Karen E. Thomas-Alyea, Electrochemical Systems, (Hoboken, New Jersey: John Wiley & Sons, Inc., 2004), 7.
  • 11. J. M. Martinez Vazquez, P. A. Ramirez Ortega, M. Vargas Ramirez, “Simulation del proceso de electro recuperation en un reactor tipo prensa mediante COMSOL®” (Paper presented at the XXXI Congreso Nacional de la Sociedad Mexicana de Electroquimica, Monterrey, Nuevo Leon, 30 May 2016), 336.
 
Source
Found a mistake? Please highlight the word and press Shift + Enter  
< Prev   CONTENTS   Next >
 
Subjects
Accounting
Business & Finance
Communication
Computer Science
Economics
Education
Engineering
Environment
Geography
Health
History
Language & Literature
Law
Management
Marketing
Mathematics
Political science
Philosophy
Psychology
Religion
Sociology
Travel